Adam Savage's Live Builds: Real-Time Box Build!

1 004
17
 
Adam recently acquired a Haimer gauge (noburn.info/id/video/2m2khb6VnI2Drqg.html) for his milling machine, which, unlike most machine tools, came to him boxless. Wanting to store the gauge with its collet in an easy-to-access and secure way, Adam knocks out a custom hinged box before diving into the rest of his Jan. 26 live stream!
Shot and edited by Norman Chan
Join this channel to support Tested and get access to perks:
noburn.info/post/iDJtJKMICpb9B1qf7qjEOA.htmljoin
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): noburn.info
Twitter: twitter.com/testedcom
Facebook: facebook.com/testedcom
Instagram: instagram.com/testedcom/
Discord: www.discord.gg/tested
Amazon Storefront: www.amazon.com/shop/adamsavagestested
Savage Industries T-shirts: cottonbureau.com/stores/savage-merchandising#/shop
Tested is:
Adam Savage twitter.com/donttrythis
Norman Chan twitter.com/nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser instagram.com/ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari twitter.com/sciencequiche
Sean Charlesworth twitter.com/cworthdynamics
Jeremy Williams twitter.com/jerware
Kayte Sabicer instagram.com/kaytesabicer
Bill Doran twitter.com/chinbeard
Ariel Waldman noburn.info
Darrell Maloney noburn.info
Kristen Lomasney twitter.com/krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson twitter.com/saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#AdamSavage #OneDayBuilds #BoxBuild
Vitenskap og teknologi
Runtime: 30:36

Kommentarer

Adam Savage’s Tested
Adam Savage’s Tested - 27 dager siden
In case you missed Adam's tool tip about his new Haimer 3D Edge Finder, it's here: https://youtu.be/tkR3bQ8Ak-8
عبدالله فلوج Abdallah Vlog
Adam . Am from Egypt and i started following you since you where in discovery channel .. Perhaps 15 years or more .. i adore your work and was searching for you .. Finally got you man .. 💪💪💪💪
Anthony Neelands
Anthony Neelands - 26 dager siden
Adam at his finest, building boxes again. :)
mfries121
mfries121 - 26 dager siden
I like how you kinda just guess-mathed everything and still got it right in the end for measurements
SteelSkin667
SteelSkin667 - 26 dager siden
This is the wrong URL, you just re-posted the one of this video ;) correct one is in the description
Pennsyltucky Counter Terrorism
@Spruce Bricks they uploaded the video privately, commented, and made it public it later.
fausto gimenez
fausto gimenez - 4 dager siden
Subtitulo en español
Salt Woodwork
Salt Woodwork - 7 dager siden
Never has a human moved as fast as Adam did in this video...
Chris Foster
Chris Foster - 7 dager siden
Bummed savage builds only got 1 season...
Spero
Spero - 11 dager siden
He said the F word!!! lol
John Crea
John Crea - 13 dager siden
Adam
You say you have a habit of making your tolerances too tight. Have you ever built a box and found out that when you cut it in half, that the saw blade kerf has now make the inside too tight? Or do you factor in the 1/8in kerf of the saw blade in your measurements?
John
John Crea
John Crea - 13 dager siden
Adam
Considering the high accuracy of the Haimer, I would suggest that instead of a R8 collet that you use a good R8 endmill holder for the Haimer. Since the Haimer can rotate in the collet before it is tightened in the spindle, it is possible that the the accuracy you work hard to get calibrating the Haimer could be OFF if the Haimer rotated when inserting into the mill spindle. A R8 endmill holder would lock the Haimer into the R8 adapter, so no worries about changes in accuracy when inserting and removing a collet. Good R8 endmill holders (like a Lyndex) have TIR of 0.0002in so then the only point of inaccuracy would be in the spindle itself. Considering the cost of the Haimer, a Lyndex endmill holder is about 2x-3x the cost of a Lyndex collet, and in my opinion well worth it for a lifetime tool like the Haimer. Definitely would not recommend budget collets for this purpose at all
John
Dominic
Dominic - 20 dager siden
Adam should just watch titans of cnc or become a machining apprentice. Seriously though machining as a job is a lot different than machining as a hobby.
The Explorographer
The Explorographer - 21 dag siden
I am a little concerned with Adam's memory. He talks about the sanding sticks thing in just about every video he uses them in.. And tells it like it is a brand new story each time. Maybe I need to be concerned with myself for watching every one of these videos and knowing that.
Northern Rebel
Northern Rebel - 21 dag siden
did anyone notice he didn't label the Haimer gauge he always labels things and forgot the pieces for the collet on the top side of the box
Northern Rebel
Northern Rebel - 21 dag siden
just busting your balls a bit Adam. i have to admit, i admire you in a way i haven't been to my shop for more than a few mins since my dog passed in October it isn't the same with the kids and or wife and not having her . i know you went thru similar issue earlier in 20 as well but i do love seeing MAGGS in the shop
panzeritino
panzeritino - 21 dag siden
Fast and in detail
B Blutarsky
B Blutarsky - 21 dag siden
I know he wasn't trying to build the Taj Mahal, but that was a pretty poorly constructed box nonetheless.
B Blutarsky
B Blutarsky - 21 dag siden
@3:06 He's going to be shitting a tool tip?
J Flannman
J Flannman - 22 dager siden
That tip about checking out the specialized tools of other industries is great. One of my favorite things to do second only to making my own tools suited for a particular application is finding unrelated tools already adapted for the tasks at hand in the shop. Always look for ways to make shop life more efficient and you’ll be amazed at how much easier you can make life and occasionally save a buck too. Thanks for more great content. 👍
projekt6
projekt6 - 22 dager siden
If you hold the nailer perpendicular to the vertical board you're nailing into (at 16:58, the sides of the box in this case), you'll greatly reduce the number of blowouts you get. This is due to the angle of the tip of the nail/brad/etc.
J.A. Steiger
J.A. Steiger - 22 dager siden
Stormtrooper blaster on the table saw. Why not? Please tell me that's not an actual Sterling SMG parts kit.
Thejs Revsbech Andersen
Thejs Revsbech Andersen - 23 dager siden
For a guy who hates drawers and likes single step retrievability, Adam sure is fond of boxes.
Renn Kay
Renn Kay - 23 dager siden
Try checking out the Scan n cut machine...I think you would like it, and probably have ideas to take it to the next level.
Adam Waggoner
Adam Waggoner - 23 dager siden
I feel jittery after watching this. How much coffee did you drink that day Adam?!?! When you were putting the screws in I was audibly screaming SLOW DOWN!!! Haha
Big Horn Woodworks
Big Horn Woodworks - 23 dager siden
My grandmother used to say "the faster I go, the behinder I get"
Eli Price
Eli Price - 23 dager siden
You’re cheeping out in us Adam , make one with the finger joints And Red felt !!!!
stagesmith
stagesmith - 23 dager siden
No Vix Bit?
Igor Ippolitov
Igor Ippolitov - 23 dager siden
"Using a nailer keep you fingers so far away from the potential path of that nail,"— says Adam and continues with nailing inserts holding them with fingers right opposite of the nailer...
Hampus Ettehag
Hampus Ettehag - 23 dager siden
The pace in this video stressed me out! Running around, throwing things around and all that. Would be nice if you just took your sweet time. I'm sure people wouldn't mind :)
The Explorographer
The Explorographer - 21 dag siden
YES! THIS! I have said many times... he is a product of the "need it yesterday" studio crew. ADAM you no longer work at ILM, slow the fuck down and enjoy your work. His videos have been so manic lately I worry for his mental health.
Mike Albrecht
Mike Albrecht - 23 dager siden
Would you like a marking gauge?
Cal Travels
Cal Travels - 23 dager siden
That was darn right impressive, to build that style of box and narrate at the same time and keep it to 30 minutes, Bravo Adam.
Zeke Himself
Zeke Himself - 23 dager siden
Every time Adam talks about using nail files for sanding sticks I get so confused as to how he knows what grit they are?! I mean, they usually only have the metric of "file" and "buff", that's not helpful for making!
Everything's Shiny
Everything's Shiny - 24 dager siden
This made me feel stressful watching it. Really need to slow down a little and take a little more care on everything. Sorry but I didn't find this enjoyable to watch.
Matt Ray
Matt Ray - 24 dager siden
Just watching your video's makes me think how much I'd love to come and work for you Adam!
Bushrat Beachbum
Bushrat Beachbum - 24 dager siden
Im sure you know all of my tips, but with tiny screws like that, an awl and a screwdriver is almost always easier and more accurate than a drill.
For critical things there's way less chance of wrecking something too!!
I used to fit mirror polished gold and silver bands and fittings to some of my work so had to be very careful!
Bushrat Beachbum
Bushrat Beachbum - 24 dager siden
It's almost certainly been said but just in case it hasn't,
To avoid the blowouts with the pin gun, stick a ply block along the underside of the magazine slide exactly the same thickness as the depth to the retracted safety, ready to fire tip of the gun, it'll keep your pins at exactly 90 degrees if you need them to be, and mostly you do!
For angled shots, lean the gun forward, it may lift the tip slightly but you can file the tip to minimise this if it's an issue.
Nothing worse than a lovely box built, only to have a blowout and ruin it! It's tricky to blend some types of ply to cover it up!
A small side note, you sometimes use so many pins it's inevitable youll blowout, or at least just leave an ugly row of pin holes, you really only need enough pins to hold the parts while the glue dries, it's the glue that gives the majority of the strength to the job, not the pins.
At least it should be!!
In the high end stuff I've done in the past, i never used pins, just tape or maybe clamps if possible to allow the glue to do its thing.
Most glues we use these days are stronger than the materials being bonded, especially true in the case of ply/quality pva!
As always, a pleasure to listen and watch you work.
Cheers!
Ps, Western Australia GMT+8hrs here
Bushrat Beachbum
Bushrat Beachbum - 24 dager siden
It's almost certainly been said but just in case it hasn't,
To avoid the blowouts with the pin gun, stick a ply block along the underside of the magazine slide exactly the same thickness as the depth to the retracted safety, ready to fire tip of the gun, it'll keep your pins at exactly 90 degrees if you need them to be, and mostly you do!
For angled shots, lean the gun forward, it may lift the tip slightly but you can file the tip to minimise this if it's an issue.
Nothing worse than a lovely box built, only to have a blowout and ruin it! It's tricky to blend some types of ply to cover it up!
A small side note, you sometimes use so many pins it's inevitable youll blowout, or at least just leave an ugly row of pin holes, you really only need enough pins to hold the parts while the glue dries, it's the glue that gives the majority of the strength to the job, not the pins.
At least it should be!!
In the high end stuff I've done in the past, i never used pins, just tape or maybe clamps if possible to allow the glue to do its thing.
Most glues we use these days are stronger than the materials being bonded, especially true in the case of ply/quality pva!
As always, a pleasure to listen and watch you work.
Cheers!
Ps, Western Australia GMT+8hrs here
Mike Curley
Mike Curley - 24 dager siden
I love the skill and passion you bring to any project, big or small. But man, you were driving me crazy - use a hand screw driver with those tiny screws. It's only a couple of turns, and your in.
B Bowling
B Bowling - 24 dager siden
I can't believe he didn't just use his arm to measure everything!
David Ward
David Ward - 24 dager siden
I noticed you did not have the riving knife installed on your table saw. SHAME ON YOU
steve schafer
steve schafer - 24 dager siden
Slooow down Adam lol
steve schafer
steve schafer - 24 dager siden
Why are there thumbs down? Can anyone enlighten me.
imrbrt
imrbrt - 24 dager siden
Is this an alternate reality? He called it a 23 gauge nailer instead of 22 gauge..... nooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
Eldormen
Eldormen - 24 dager siden
when building a box like this, you count in the thickness of your blade in the hight for later right? just checking.
platonicsolid
platonicsolid - 24 dager siden
The instrument won't be safe in the box until a plywood retainer is fastened to the upper lid too.
platonicsolid
platonicsolid - 24 dager siden
It appears that the difficulty driving #2Phillips headed screws is from using a #1Phillips bit.
Stashu Stashu
Stashu Stashu - 24 dager siden
Adam!! What happened to the Segway! I miss seeing you glide around on it!!
cactuS Mann
cactuS Mann - 24 dager siden
You should get or even better, make a brace bit. Even half finished, mine does things a power drill cannot.
melig1991
melig1991 - 25 dager siden
Adam: "You should neve have any part of your body near any possible trajectory of a nailer."
Also Adam at 29:36 : "Puts fingers literally directly in the straight line of the nailer.
Brad Knowles
Brad Knowles - 25 dager siden
@21:34 Adam — so why are you using the table saw for this cut, when the band saw would have a thinner kerf?
And why did you build the whole box first — with nails — and then cut it in half, where you would risk the saw blade hitting a nail?
Don Chartier
Don Chartier - 25 dager siden
"Episode 1,472: Adam learns about the existence of emery boards."
Steve Nicholson
Steve Nicholson - 25 dager siden
Video should be titled "What? You don't think I can make a box before your pizza shows up?" 😂😎👍👍
Rich Wojehowski
Rich Wojehowski - 25 dager siden
These builds are stressful and seem like a contest to get done in record time ... or else
skunked42
skunked42 - 25 dager siden
Next up: Adam weathers the box to match the rest of his boxes.
Jeanette Swalberg
Jeanette Swalberg - 25 dager siden
Cutting the completed box in half then adding hinges and clasp...Called it!
Took me a second, but I've been paying attention during previous builds.
DR Boofenstein
DR Boofenstein - 25 dager siden
You should remove the strings from your hoodie. When I went to carpentry school we had to remove the strings from our hoodies so they couldn't get caught in the table saw.
gary miles-watson
gary miles-watson - 25 dager siden
ends 1st bottom last ?
Brad Penner
Brad Penner - 25 dager siden
It was driving me crazy that he didn't just drive those tiny screws by hand instead of fighting with an oversized power tool.
John Macnaughton
John Macnaughton - 25 dager siden
Adam, I have a suggestion. You obviously have no shortage of project ideas, but if you wanted to, you could do a prop/cosplay one day build once a month or so and auction it off. Do a 50/50 thing with a charity. Lots of people would like a Savage genuine imitation. You could ask for a theme and get viewers to vote. Then you could pick something from the theme. Say they Picked Avatar: The last Airbender, you could pick something from the original show to make, say Aangs glider or Sokka's club.
Michael Jones
Michael Jones - 25 dager siden
nails can turn 180 defrees if they hit a knot and come straight at you almost as fast as they left the gun
Spacehy
Spacehy - 25 dager siden
I don't know about you guys, but the box tagged 'stormtrooper blaster' made me a bit nervous.
Jim Greer
Jim Greer - 25 dager siden
I expect someone to come up with the shop equivalent to mise an place before the next video.
Marcelo Volcato
Marcelo Volcato - 25 dager siden
It's crazy the USA still lives in the 1700's and does not use meters and centimeters like the rest of the world. The meter was created in 1799!
Damon S
Damon S - 25 dager siden
What I do when cutting open a box is I cut the hinge side first. Then screw on the hinges, and then cut the other 3 sides. Keeps you from having to hold both halves of the box. Also works for the latch side. Just gets rid of the need for a 3rd hand.
La Rose aux Bois / Rosewood Woodworking
Good god 😱😱😱 Can’t beleive that you still have all of your fingers after this build !!! No need to rush so mutch on the table saw please be more carefull .. after 30 plus years in cabinet making , i’ve seen so many mistakes made this way 😣😣 By the way can you tell me what is this for a haimer tool ? Thx 😜🇨🇦
funkysod
funkysod - 25 dager siden
The nailgun should be hold perpendicular to the edge. Look at one of the nails and you understand why blowout happens when shooting the nail in line with the edge. I've said it before, could someone pass it along to Mr Savage please :)
Gone 004
Gone 004 - 26 dager siden
16:27 You can see the nail gun slowly aiming itself at your balls.
Denhalen79
Denhalen79 - 26 dager siden
Either Adam has lost his mind and is talking to non existing people, or finally other people are in Adam's cave again.
Bert Laverman
Bert Laverman - 26 dager siden
It's not just the Imperials, did you notice that the US is the only country (that I know of) constantly measuring in fractions? "Quarter-inch"? Eights, twelfths, and much more flying around. Very confusing, because, even when I know that I need to multiply inches with 2.54 before they mean anything, and feet are roughly 30, but then I suddenly need to do fractions of them! You're constantly forcing me to keep my mental calculation skills active. Should I be thankful or irritated? Let's just keep it at "in awe over your building skills". ;-)
6MM 25
6MM 25 - 26 dager siden
Bit rushed
Maurice Calis
Maurice Calis - 26 dager siden
Adam, get yourself a set of self centering drill bits. You'll wonder how you lived without them.
Matthew Jaime
Matthew Jaime - 26 dager siden
Adam at 18:12 : “...keep your fingers so far away from the potential path of the nail...”
Adam at 29:36 : *puts fingers directly in the potential path of the nail*
Joliie
Joliie - 26 dager siden
If Adam started using the Metric system the rest would follow ;)
Dave Nisbet
Dave Nisbet - 26 dager siden
Savage Builds not in Australia !!
Tim Whalan
Tim Whalan - 26 dager siden
👍🏻🍺
Coal Zlaw
Coal Zlaw - 26 dager siden
i just watched a man build a box for 30 minutes. i feel like i should not have done that
Gibson goson 1849
Gibson goson 1849 - 26 dager siden
Put a brad through my thumb not fun 🙈
Gibson goson 1849
Gibson goson 1849 - 26 dager siden
Your a maniac I love it!
Zamboni
Zamboni - 26 dager siden
Adam, I need some of that good stuff you are on...lol
fredy gump
fredy gump - 26 dager siden
It is exactly 12:00am. Thanks Adam. Somehow you knew it was morning before I did!
Gdude277
Gdude277 - 26 dager siden
im the 2000th like that felt good
mike r
mike r - 26 dager siden
good lord just use metric system like the civilised world haha
Bob Star
Bob Star - 26 dager siden
Really seemed uncharacteristically frazzled on that one. Still got the job done tho.
Joe Garofalo II
Joe Garofalo II - 26 dager siden
A haimer gauge, excellent!! I love those things! So great at all the haimers they gauge by performing actions on things!
Tim Wenger
Tim Wenger - 26 dager siden
Use Robertson bits!!!!! They will make your life infinitely better!!!!?
Nick Elder
Nick Elder - 26 dager siden
Stop! Haimer time!!!
Paul Otts
Paul Otts - 26 dager siden
Adam, when you are sanding, you should back it up with the William Tell Overture (Lone Ranger).
James McGuire
James McGuire - 26 dager siden
Only three countries – the U.S., Liberia and Myanmar – still (mostly or officially) stick to the imperial system
pileofstuff
pileofstuff - 26 dager siden
Wait... There's 10 episodes of Savage builds?
I only ever saw 8 of them.
Are there still 2 unreleased ones? (he said hopefully)
H.L. Westlake
H.L. Westlake - 26 dager siden
Adam Made a Box Hey !
I wrote the song. Stay tuned
ROCK ON FREAKS
H.L.
John Ohrn
John Ohrn - 26 dager siden
Never underestimate the power of beauty supplies. I recently restored an original Gameboy which had yellowed over time, and retrobrighted it successfully with good ol', classic, over-the-counter hair dye.
g-pa Lloyd
g-pa Lloyd - 26 dager siden
Understatement of the year......” do I seem a little manic!” LOL! 😜
StickySlippers
StickySlippers - 26 dager siden
ADAM its beautiful! BUT...... You need to add at least one more of those curved standoff pieces to the lid in case it flips over! Add this and it will be perfect!
Binary Soul
Binary Soul - 26 dager siden
look closer! it's called a "3d taster" mmmm tasty I love the name, atleast the once I used had that printed on the face
Graham Gibby
Graham Gibby - 26 dager siden
I watch (and Like) everything Adam does from the Cave, and most of the time I think 'Wow, iPhone camera pretty good' then they get out the Good Stuff, and the overall quality is NOTICEABLY better. Here's to real-crew productions again when it's safe.
Seth K
Seth K - 26 dager siden
I miss Mythbusters alot. However, Im so glad you are active on youtube Adam and we get to see you on the regular. Wish Jamie, Kari and Tory were on Youtube too. And of course wish Grant was still alive. RIP Grant. Thanks for entertaining us Adam!
Garry Waters
Garry Waters - 26 dager siden
i don't think adam was rushing so he could answer questions i think he wanted to play with the new machines that arrived
sam. 64evo
sam. 64evo - 26 dager siden
im guessing hat on your head somthing you had since your teenage years? i love that it's showing its age makes you look like your the cool kid in town not some space geek lol
tarifonium
tarifonium - 26 dager siden
Most beautiful ugly box ever made on tested. Love you Adam.
demo3d
demo3d - 26 dager siden
Wow! Adam really seems to be in a rush with this box.
Dario 108
Dario 108 - 26 dager siden
I wish I could make things like this and not use a ruler or find the centre before attaching catches...I have to make sure everything is millimetre perfect 🤦‍♂️😆
William Blakers
William Blakers - 26 dager siden
Make the bloody thing 9 inches!!!! Why 8.75????
MrSeraph666
MrSeraph666 - 26 dager siden
Ah the old sanding stick story. It almost doesn’t feel like an episode of One day builds without it 😜👍
SuperSecretSquirell
SuperSecretSquirell - 26 dager siden
20:18 the question every man of every age constantly asks himself.
MrGetzenwithit
MrGetzenwithit - 25 dager siden
Well hopefully the answer isn't to use our table-saw and slice through the midsection...
Drflamerock
Drflamerock - 26 dager siden
Stormtrooper blaster! 👀
Neste